dmesg - Sapphire AMD Radeon
random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
Linux version 4.13.5-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Fri Oct 6 09:58:47 CEST 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x00000000d5aa5fff] usable
BIOS-e820: [mem 0x00000000d5aa6000-0x00000000d5b27fff] reserved
BIOS-e820: [mem 0x00000000d5b28000-0x00000000dba57fff] usable
BIOS-e820: [mem 0x00000000dba58000-0x00000000dbbe9fff] reserved
BIOS-e820: [mem 0x00000000dbbea000-0x00000000dbce0fff] usable
BIOS-e820: [mem 0x00000000dbce1000-0x00000000dc0bffff] ACPI NVS
BIOS-e820: [mem 0x00000000dc0c0000-0x00000000dce73fff] reserved
BIOS-e820: [mem 0x00000000dce74000-0x00000000dcee2fff] type 20
BIOS-e820: [mem 0x00000000dcee3000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by American Megatrends
efi: ACPI 2.0=0xdbce1000 ACPI=0xdbce1000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0xda688358
random: fast init done
SMBIOS 3.0.0 present.
DMI: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F9a 09/08/2017
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DF000000 mask FFFFFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000da688358 to 0x00000000da688390.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9c64c0096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0xcdd64000, 0xcdd64fff] PGTABLE
BRK [0xcdd65000, 0xcdd65fff] PGTABLE
BRK [0xcdd66000, 0xcdd66fff] PGTABLE
BRK [0xcdd67000, 0xcdd67fff] PGTABLE
BRK [0xcdd68000, 0xcdd68fff] PGTABLE
BRK [0xcdd69000, 0xcdd69fff] PGTABLE
BRK [0xcdd6a000, 0xcdd6afff] PGTABLE
BRK [0xcdd6b000, 0xcdd6bfff] PGTABLE
BRK [0xcdd6c000, 0xcdd6cfff] PGTABLE
BRK [0xcdd6d000, 0xcdd6dfff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x3683b000-0x37414fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBCE1000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBCE1098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DBCE6E58 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170531/tbfadt-658)
ACPI: DSDT 0x00000000DBCE11D8 005C7C (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DC0BDC80 000040
ACPI: APIC 0x00000000DBCE6F70 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DBCE7050 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBCE7098 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: FIDT 0x00000000DBCEFCE8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBCEFD88 0020E4 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DBCF1E70 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DBCF2DC0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DBCF2DF0 0017FF (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DBCF45F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000DBCF4630 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DBCF4668 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DBCF4690 000042 (v01 00000000 00000000)
ACPI: BGRT 0x00000000DBCF46D8 000038 (v01 ALASKA ALASKAA 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DBCF4710 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DBCF47E0 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DBCF48D8 001664 (v01 AMD CPMCMN 00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x00000000d5aa5fff]
node 0: [mem 0x00000000d5b28000-0x00000000dba57fff]
node 0: [mem 0x00000000dbbea000-0x00000000dbce0fff]
node 0: [mem 0x00000000dcee3000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4181001
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14116 pages used for memmap
DMA32 zone: 903402 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0xd5aa6000-0xd5b27fff]
PM: Registered nosave memory: [mem 0xdba58000-0xdbbe9fff]
PM: Registered nosave memory: [mem 0xdbce1000-0xdc0bffff]
PM: Registered nosave memory: [mem 0xdc0c0000-0xdce73fff]
PM: Registered nosave memory: [mem 0xdce74000-0xdcee2fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9c68dec00000 s106520 r8192 d32744 u262144
pcpu-alloc: s106520 r8192 d32744 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115644
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16237240K/16724004K available (6643K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 486764K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 28349 entries in 111 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 8448, nr_irqs: 1096, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3792.811 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7588.68 BogoMIPS (lpj=12642703)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 2
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Ryzen 7 1700X Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (121032.20 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdbce1000-0xdc0bffff] (4059136 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 23:28:13, date: 10/13/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:03:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe4a0000-0xfe4a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xfe480000-0xfe49ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xfe400000-0xfe47ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-08]
pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe100000-0xfe4fffff]
pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:02.0: PME# supported from D3hot D3cold
pci 0000:04:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:03.0: PME# supported from D3hot D3cold
pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:04.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 04-08]
pci 0000:03:00.2: bridge window [io 0xd000-0xefff]
pci 0000:03:00.2: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:05:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:06:00.0: [8086:1539] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfe200000-0xfe21ffff]
pci 0000:06:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xfe220000-0xfe223fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:02.0: PCI bridge to [bus 06]
pci 0000:04:02.0: bridge window [io 0xe000-0xefff]
pci 0000:04:02.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:07:00.0: [1969:e0b1] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xfe100000-0xfe13ffff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:03.0: PCI bridge to [bus 07]
pci 0000:04:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:03.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:04:04.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [1002:7300] type 00 class 0x030000
pci 0000:09:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:09:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:09:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
pci 0000:09:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:09:00.1: [1002:aae8] type 00 class 0x040300
pci 0000:09:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
pci 0000:09:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 09]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:11:00.0: [1022:145a] type 00 class 0x130000
pci 0000:11:00.2: [1022:1456] type 00 class 0x108000
pci 0000:11:00.2: reg 0x18: [mem 0xfe600000-0xfe6fffff]
pci 0000:11:00.2: reg 0x24: [mem 0xfe700000-0xfe701fff]
pci 0000:11:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:11:00.3: reg 0x10: [mem 0xfe500000-0xfe5fffff 64bit]
pci 0000:11:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 11]
pci 0000:00:07.1: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:12:00.0: [1022:1455] type 00 class 0x130000
pci 0000:12:00.2: [1022:7901] type 00 class 0x010601
pci 0000:12:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
pci 0000:12:00.2: PME# supported from D3hot D3cold
pci 0000:12:00.3: [1022:1457] type 00 class 0x040300
pci 0000:12:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
pci 0000:12:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 12]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
pci 0000:09:00.0: vgaarb: setting as boot VGA device
pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:09:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd5aa6000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xdba58000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbce1000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:04:02.0: PCI bridge to [bus 06]
pci 0000:04:02.0: bridge window [io 0xe000-0xefff]
pci 0000:04:02.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:04:03.0: PCI bridge to [bus 07]
pci 0000:04:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:03.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:04:04.0: PCI bridge to [bus 08]
pci 0000:03:00.2: PCI bridge to [bus 04-08]
pci 0000:03:00.2: bridge window [io 0xd000-0xefff]
pci 0000:03:00.2: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-08]
pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
pci 0000:00:01.3: bridge window [mem 0xfe100000-0xfe4fffff]
pci 0000:00:03.1: PCI bridge to [bus 09]
pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 11]
pci 0000:00:07.1: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:00:08.1: PCI bridge to [bus 12]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe4fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe3fffff]
pci_bus 0000:05: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:09: resource 0 [io 0xf000-0xffff]
pci_bus 0000:09: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:11: resource 1 [mem 0xfe500000-0xfe7fffff]
pci_bus 0000:12: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12136K
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.3 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:03.1 to group 4
iommu: Adding device 0000:00:04.0 to group 5
iommu: Adding device 0000:00:07.0 to group 6
iommu: Adding device 0000:00:07.1 to group 6
iommu: Adding device 0000:00:08.0 to group 7
iommu: Adding device 0000:00:08.1 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:18.0 to group 9
iommu: Adding device 0000:00:18.1 to group 9
iommu: Adding device 0000:00:18.2 to group 9
iommu: Adding device 0000:00:18.3 to group 9
iommu: Adding device 0000:00:18.4 to group 9
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:00:18.6 to group 9
iommu: Adding device 0000:00:18.7 to group 9
iommu: Adding device 0000:03:00.0 to group 10
iommu: Adding device 0000:03:00.1 to group 10
iommu: Adding device 0000:03:00.2 to group 10
iommu: Adding device 0000:04:00.0 to group 10
iommu: Adding device 0000:04:02.0 to group 10
iommu: Adding device 0000:04:03.0 to group 10
iommu: Adding device 0000:04:04.0 to group 10
iommu: Adding device 0000:05:00.0 to group 10
iommu: Adding device 0000:06:00.0 to group 10
iommu: Adding device 0000:07:00.0 to group 10
iommu: Adding device 0000:09:00.0 to group 11
iommu: Using direct mapping for device 0000:09:00.0
iommu: Adding device 0000:09:00.1 to group 11
iommu: Adding device 0000:11:00.0 to group 6
iommu: Adding device 0000:11:00.2 to group 6
iommu: Adding device 0000:11:00.3 to group 6
iommu: Adding device 0000:12:00.0 to group 7
iommu: Adding device 0000:12:00.2 to group 7
iommu: Adding device 0000:12:00.3 to group 7
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.3: AER enabled with IRQ 28
pcieport 0000:00:03.1: AER enabled with IRQ 29
pcieport 0000:00:01.3: Signaling PME with IRQ 28
pcieport 0000:00:03.1: Signaling PME with IRQ 29
pcieport 0000:00:07.1: Signaling PME with IRQ 30
pcieport 0000:00:08.1: Signaling PME with IRQ 32
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
GHES: HEST is not enabled!
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001129
microcode: CPU1: patch_level=0x08001129
microcode: CPU2: patch_level=0x08001129
microcode: CPU3: patch_level=0x08001129
microcode: CPU4: patch_level=0x08001129
microcode: CPU5: patch_level=0x08001129
microcode: CPU6: patch_level=0x08001129
microcode: CPU7: patch_level=0x08001129
microcode: CPU8: patch_level=0x08001129
microcode: CPU9: patch_level=0x08001129
microcode: CPU10: patch_level=0x08001129
microcode: CPU11: patch_level=0x08001129
microcode: CPU12: patch_level=0x08001129
microcode: CPU13: patch_level=0x08001129
microcode: CPU14: patch_level=0x08001129
microcode: CPU15: patch_level=0x08001129
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1326520424, 0)->(1606638296, -280117872)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 5:369:504
rtc_cmos 00:02: setting system clock to 2017-10-13 23:28:14 UTC (1507937294)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1536K
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x08000418
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
ahci 0000:03:00.1: version 3.0
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480100 irq 41
ata2: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480180 irq 41
ata3: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480200 irq 41
ata4: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480280 irq 41
ata5: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480300 irq 41
ata6: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480380 irq 41
ata7: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480400 irq 41
ata8: SATA max UDMA/133 abar m131072@0xfe480000 port 0xfe480480 irq 41
ahci 0000:12:00.2: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:12:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
ahci 0000:12:00.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 43
ata10: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808180 irq 44
xhci_hcd 0000:05:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:11:00.3: xHCI Host Controller
xhci_hcd 0000:11:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:11:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:11:00.3: xHCI Host Controller
xhci_hcd 0000:11:00.3: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
usb 1-7: new full-speed USB device number 2 using xhci_hcd
usb 5-1: new full-speed USB device number 2 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Thrustmaster T.16000M as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:044F:B10A.0001/input/input1
hid-generic 0003:044F:B10A.0001: input,hidraw0: USB HID v1.00 Joystick [Thrustmaster T.16000M] on usb-0000:03:00.0-7/input0
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 2 ports detected
usb 5-2: new high-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3792.874 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5818a734c, max_idle_ns: 881590694765 ns
usb 1-8: new full-speed USB device number 3 using xhci_hcd
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 2 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
usb 5-3: new high-speed USB device number 4 using xhci_hcd
input: Thrustmaster TWCS Throttle as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8:1.0/0003:044F:B687.0002/input/input2
hid-generic 0003:044F:B687.0002: input,hidraw1: USB HID v1.11 Joystick [Thrustmaster TWCS Throttle] on usb-0000:03:00.0-8/input0
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
usb 5-2.2: new full-speed USB device number 5 using xhci_hcd
input: Logitech Logitech G35 Headset as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-2/5-2.2/5-2.2:1.3/0003:046D:0A15.0003/input/input3
hid-generic 0003:046D:0A15.0003: input,hidraw2: USB HID v1.00 Device [Logitech Logitech G35 Headset] on usb-0000:11:00.3-2.2/input3
usb 5-4: new full-speed USB device number 6 using xhci_hcd
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: ATA-9: Crucial_CT512M550SSD1, MU02, max UDMA/133
ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: supports DRM functions and may not be fully accessible
input: Fnatic Gear FLICK Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-4/5-4:1.0/0003:04D9:A0F9.0004/input/input4
hid-generic 0003:04D9:A0F9.0004: input,hidraw3: USB HID v1.10 Mouse [Fnatic Gear FLICK Optical Mouse] on usb-0000:11:00.3-4/input0
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Crucial_CT512M55 MU02 PQ: 0 ANSI: 5
clocksource: Switched to clocksource tsc
input: Fnatic Gear FLICK Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-4/5-4:1.1/0003:04D9:A0F9.0005/input/input5
hid-generic 0003:04D9:A0F9.0005: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Fnatic Gear FLICK Optical Mouse] on usb-0000:11:00.3-4/input1
hid-generic 0003:04D9:A0F9.0006: hiddev1,hidraw5: USB HID v1.10 Device [Fnatic Gear FLICK Optical Mouse] on usb-0000:11:00.3-4/input2
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
ata6.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATAPI: HL-DT-ST BDDVDRW CH10LS20, 1.00, max UDMA/133
ata7.00: configured for UDMA/133
scsi 6:0:0:0: CD-ROM HL-DT-ST BDDVDRW CH10LS20 1.00 PQ: 0 ANSI: 5
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: HPA detected: current 1250261615, native 1250263728
ata8.00: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
ata8.00: 1250261615 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 5
ata5.00: Enabling discard_zeroes_data
sd 4:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 5:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdc] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: Enabling discard_zeroes_data
sda: sda1 sda2
sdb: sdb1 sdb2 sdb3 sdb4
ata5.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sda] supports TCG Opal
sd 4:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 7:0:0:0: [sdc] Attached SCSI disk
sr 6:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Login Prompts.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on Journal Socket.
EXT4-fs (sda2): re-mounted. Opts: data=ordered
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
sr 6:0:0:0: Attached scsi generic sg2 type 5
sd 7:0:0:0: Attached scsi generic sg3 type 0
systemd-journald[340]: Received request to flush runtime journal from PID 1
acpi_cpufreq: overriding BIOS provided _PSD data
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
wmi_bus wmi_bus-PNP0C14:01: WQAA data block query control method not found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ccp 0000:11:00.2: enabling device (0000 -> 0002)
ccp 0000:11:00.2: enabled
dca service started, version 1.12.1
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
input: PC Speaker as /devices/platform/pcspkr/input/input8
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
mousedev: PS/2 mouse device common for all mice
PTP clock support registered
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-1/5-1:1.0/input/input9
usbcore: registered new interface driver xpad
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
sp5100_tco: I/O address 0x0cd6 already in use
Linux agpgart interface v0.103
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alx 0000:07:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:9b:a8:2b]
alx 0000:07:00.0 enp7s0: renamed from eth0
snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:09:00.1: Force to non-snoop mode
snd_hda_intel 0000:12:00.3: enabling device (0000 -> 0002)
random: crng init done
kvm: disabled by bios
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input14
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input15
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=3920
Parsing CRAT table with 0 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x174B:0xE331 0xCB).
[drm] register mmio base: 0xFE900000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1453 = 733903/e
[drm] probing mlw for device 1022:1453 = 733903
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
snd_hda_codec_realtek hdaudioC2D1: autoconfig for ALC1220: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
snd_hda_codec_realtek hdaudioC2D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D1: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D1: inputs:
snd_hda_codec_realtek hdaudioC2D1: Front Mic=0x1a
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card2/input16
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card2/input17
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card2/input18
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card2/input19
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card2/input20
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card2/input21
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card2/input22
[drm] BIOS signature incorrect 0 0
amdgpu 0000:09:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 113-1E3311U-X51
[drm] GPU post is not needed
[drm] Changing default dispclk from 500Mhz to 600Mhz
[drm] vm size is 64 GB, block size is 13-bit
amdgpu 0000:09:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
amdgpu 0000:09:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits HBM
[TTM] Zone kernel: Available graphics memory: 8224070 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 1048576, num gpu pages 1048576
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:09:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
pps pps0: new PPS source ptp0
igb 0000:06:00.0: added PHC on eth0
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 1c:1b:0d:9b:a8:29
igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
usbcore: registered new interface driver snd-usb-audio
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DP-2
[drm] HPD5
[drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DP-3
[drm] HPD6
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY2
[drm] Connector 3:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY
amdgpu 0000:09:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff9c68c5e06008
amdgpu 0000:09:00.0: fence driver on ring 1 use gpu addr 0x0000000100000018, cpu addr 0xffff9c68c5e06018
amdgpu 0000:09:00.0: fence driver on ring 2 use gpu addr 0x0000000100000028, cpu addr 0xffff9c68c5e06028
amdgpu 0000:09:00.0: fence driver on ring 3 use gpu addr 0x0000000100000038, cpu addr 0xffff9c68c5e06038
amdgpu 0000:09:00.0: fence driver on ring 4 use gpu addr 0x0000000100000048, cpu addr 0xffff9c68c5e06048
amdgpu 0000:09:00.0: fence driver on ring 5 use gpu addr 0x0000000100000058, cpu addr 0xffff9c68c5e06058
amdgpu 0000:09:00.0: fence driver on ring 6 use gpu addr 0x0000000100000068, cpu addr 0xffff9c68c5e06068
amdgpu 0000:09:00.0: fence driver on ring 7 use gpu addr 0x0000000100000078, cpu addr 0xffff9c68c5e06078
amdgpu 0000:09:00.0: fence driver on ring 8 use gpu addr 0x0000000100000088, cpu addr 0xffff9c68c5e06088
amdgpu 0000:09:00.0: fence driver on ring 9 use gpu addr 0x000000010000009c, cpu addr 0xffff9c68c5e0609c
amdgpu 0000:09:00.0: fence driver on ring 10 use gpu addr 0x00000001000000ac, cpu addr 0xffff9c68c5e060ac
amdgpu 0000:09:00.0: fence driver on ring 11 use gpu addr 0x00000001000000bc, cpu addr 0xffff9c68c5e060bc
[drm] Found UVD firmware Version: 1.87 Family ID: 12
amdgpu 0000:09:00.0: fence driver on ring 12 use gpu addr 0x0000000000a12e90, cpu addr 0xffffb5400b43fe90
[drm] Found VCE firmware Version: 52.8 Binary ID: 3
amdgpu 0000:09:00.0: fence driver on ring 13 use gpu addr 0x00000001000000dc, cpu addr 0xffff9c68c5e060dc
amdgpu 0000:09:00.0: fence driver on ring 14 use gpu addr 0x00000001000000ec, cpu addr 0xffff9c68c5e060ec
amdgpu 0000:09:00.0: fence driver on ring 15 use gpu addr 0x00000001000000fc, cpu addr 0xffff9c68c5e060fc
igb 0000:06:00.0 enp6s0: renamed from eth0
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Failed to setup PCC HW register! Wrong GPIO assigned for VDDC_PCC_GPIO_PINID!
[drm] ring test on 0 succeeded in 13 usecs
[drm] ring test on 9 succeeded in 7 usecs
[drm] ring test on 1 succeeded in 8 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 7 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 5 usecs
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[drm] ring test on 13 succeeded in 10 usecs
[drm] ring test on 14 succeeded in 2 usecs
[drm] ring test on 15 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] fb mappable at 0xE0D93000
[drm] vram apper at 0xE0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
amdgpu 0000:09:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.18.0 20150101 for 0000:09:00.0 on minor 0
fuse init (API version 7.26)
igb 0000:06:00.0 enp6s0: igb: enp6s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
usb 5-2: USB disconnect, device number 3
usb 5-2.2: USB disconnect, device number 5
usb 6-2: USB disconnect, device number 2
usb 6-2: new SuperSpeed USB device number 3 using xhci_hcd
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 2 ports detected
usb 5-2: new high-speed USB device number 7 using xhci_hcd
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 2 ports detected
usb 5-2.2: new full-speed USB device number 8 using xhci_hcd
input: Logitech Logitech G35 Headset as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-2/5-2.2/5-2.2:1.3/0003:046D:0A15.0007/input/input23
hid-generic 0003:046D:0A15.0007: input,hidraw2: USB HID v1.00 Device [Logitech Logitech G35 Headset] on usb-0000:11:00.3-2.2/input3
usb 3-1: new full-speed USB device number 2 using xhci_hcd
input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:04:00.0/0000:05:00.0/usb3/3-1/3-1:1.0/0003:0416:5020.0008/input/input24
hid-generic 0003:0416:5020.0008: input,hidraw6: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:05:00.0-1/input0
tun: Universal TUN/TAP device driver, 1.6
input: Microsoft X-Box 360 pad as /devices/virtual/input/input25
usb 3-1: USB disconnect, device number 2
usb 3-1: new full-speed USB device number 3 using xhci_hcd
input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:04:00.0/0000:05:00.0/usb3/3-1/3-1:1.0/0003:0416:5020.0009/input/input26
hid-generic 0003:0416:5020.0009: input,hidraw6: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:05:00.0-1/input0
usb 3-1: USB disconnect, device number 3
usb 3-1: new full-speed USB device number 5 using xhci_hcd
input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:04:00.0/0000:05:00.0/usb3/3-1/3-1:1.0/0003:0416:5020.000A/input/input27
hid-generic 0003:0416:5020.000A: input,hidraw6: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:05:00.0-1/input0
usb 5-2.2: USB disconnect, device number 8
usb 5-2: USB disconnect, device number 7
usb 6-2: USB disconnect, device number 3
usb 6-2: new SuperSpeed USB device number 4 using xhci_hcd
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 2 ports detected
usb 5-2: new high-speed USB device number 9 using xhci_hcd
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 2 ports detected
usb 5-2.2: new full-speed USB device number 10 using xhci_hcd
input: Logitech Logitech G35 Headset as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-2/5-2.2/5-2.2:1.3/0003:046D:0A15.000B/input/input28
hid-generic 0003:046D:0A15.000B: input,hidraw2: USB HID v1.00 Device [Logitech Logitech G35 Headset] on usb-0000:11:00.3-2.2/input3
usb 3-1: USB disconnect, device number 5
usb 3-1: new full-speed USB device number 6 using xhci_hcd
input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:04:00.0/0000:05:00.0/usb3/3-1/3-1:1.0/0003:0416:5020.000C/input/input29
hid-generic 0003:0416:5020.000C: input,hidraw6: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:05:00.0-1/input0
usb 3-1: USB disconnect, device number 6
usb 3-1: new full-speed USB device number 7 using xhci_hcd
input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:04:00.0/0000:05:00.0/usb3/3-1/3-1:1.0/0003:0416:5020.000D/input/input30
hid-generic 0003:0416:5020.000D: input,hidraw6: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:05:00.0-1/input0